Striping
Serving Chicago and Northwest Indiana

( Paint material chosen to best fit your needs)

Material used to exceed federal specification TT-P-85E or TT-P-1952B

1. Heavy Yellow and White Alkyd: Solvent based traffic paint. Although this paint may be durable, bleeding often occurs when applied over freshly sealcoated areas. Freshly sealcoated areas are recommended to cure overnight before application of traffic paint.

2. Chlorinated Rubber -(White & Yellow) : Solvent based traffic paint. This paint is recommended for new asphalt or sealcoated asphalt that has cured over60 days. Although this product is perhaps the most durable paint, bleeding has occurred when place over freshly sealcoated areas.

3. Freshcote - Yellow and White Latex : Latex base traffic paint. Latex paint is not as durable as solvent based paint but may be applied to freshly sealcoated areas without bleeding occurring.

Application of Traffic Paint

Prior to the application of traffic paint the surface shall be cleaned from all dust and debris to insure proper bonding of the traffic paint. When new layouts are necessary, pavement markings shall be accurately measured and marked. On restriping of existing lines, existing stripes shall be located and marked.

Pavement markings will be placed using air spray equipment or a gravity striping machine which insures uniform line width, clean edges, and proper paint coverage rates. Perm-A-Seals equipped with all the necessary equipment needed for the application of the different types of traffic paint stated above, thus, allowing Perm-A-Seal to apply the appropriate traffic paint to suit your needs.